Dell XPS 13 9360 XPS 13 Service Manual - Page 54
Removing the display assembly, Prerequisites, Procedure
![]() |
View all Dell XPS 13 9360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Removing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery. Procedure 1 Disconnect the touchscreen cable (optional) and camera cable from the system board. 2 Peel off the tape that secures the antenna cables to the system board. 3 Remove the screw (M2x3) that secures the wireless-card bracket to the system board. 4 Lift the wireless-card bracket off the wireless card. 54
![](/manual_guide/products/dell-xps-13-9360-xps-13-service-manual-8be871d/54.png)