Dell XPS 15 9575 2-in-1 XPS 15 2-in-1 Service Manual - Page 42

Replacing the display assembly, Procedure

Get Dell XPS 15 9575 2-in-1 PDF manuals and user guides View all Dell XPS 15 9575 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

24 Replacing the display assembly NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. With the display screen facing down, align the screw holes on the display assembly with the screw holes on the palm-rest and keyboard assembly. 2. Replace the six screws (M2.5x4) that secure the display assembly to the palm-rest and keyboard assembly. 3. Close the display. 4. Connect the antenna cables to the I/O board. 5. Align the screw holes on the wireless-antenna bracket with the screw holes on the I/O board and replace the two screws (M2x4) that secure the bracket to the I/O board. 6. Connect the display cable to the system board and close the latch. 7. Align the screw holes on the display-cable bracket with the screw holes on the system board and replace the two screws (M1.6x1.8) that secure the bracket to the system board. 8. Adhere the tape that secures the display-cable bracket to the system board. 9. Adhere the camera cable to the palm-rest and keyboard assembly. 10. Connect the camera cable to the system board and close the latch. 42 Replacing the display assembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Replacing the display assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
After
working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1.
With the display screen facing down, align the screw holes on the display assembly with the screw holes on the palm-rest and
keyboard assembly.
2.
Replace the six screws (M2.5x4) that secure the display assembly to the palm-rest and keyboard assembly.
3.
Close the display.
4.
Connect the antenna cables to the I/O board.
5.
Align the screw holes on the wireless-antenna bracket with the screw holes on the I/O board and replace the two screws (M2x4) that
secure the bracket to the I/O board.
6.
Connect the display cable to the system board and close the latch.
7.
Align the screw holes on the display-cable bracket with the screw holes on the system board and replace the two screws (M1.6x1.8)
that secure the bracket to the system board.
8.
Adhere the tape that secures the display-cable bracket to the system board.
9.
Adhere the camera cable to the palm-rest and keyboard assembly.
10.
Connect the camera cable to the system board and close the latch.
24
42
Replacing the display assembly