Denon AVR 4806 Owners Manual - Page 56
Cursor, Enter, Surround Parameter, Default Setting - dimensions
UPC - 081757506465
View all Denon AVR 4806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Basic Operation SURROUND STANDARD ENTER PARAMETER STANDARD SURROUND CURSOR ENTER CURSOR SURROUND PARAMETER 5 Press the CURSOR D or H button to select the various surround parameters. Example: DOLBY PLIIx music mode screen • There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO). The AVR-4806 sets the mode automatically according to the types of speakers set during the system setup process ( page 113, 114). When set with the on screen display using the remote control unit while in the MUSIC mode, set the " " mark to "OPTIONS 0" pressing the CURSOR D or H button, then press the CURSOR F button. Press the ENTER button to return to the previous screen. 6 Press the CURSOR F or G button to adjust the parameters setting. DEFAULT setting: Press the CURSOR F button to select "Default Yes 0", then parameters set to default setting. 7 Press the ENTER or SURROUND PARAMETER button to complete the setting. 2 Surround parameters r Pro Logic IIx and Pro Logic II Mode: Select one of the modes ("Cinema", "Music", "Pro Logic" or "Game"). The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround. The Music mode is recommended for stereo music and surround-encoded stereo music sources. The Pro Logic mode emulates Dolby Laboratories' original Dolby Pro Logic surround decoding, and may provide better results with older, legacy surround-encoded program material. The Game mode is optimized for computer and/or dedicated game box consoles, that feature stereo analog or digital outputs. It can only be used with 2-channel stereo sources. PANORAMA: This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. Select "OFF" or "ON". DIMENSION: This control gradually adjust the soundfield either towards the front or towards the rear. The control can be set in 7 steps from 0 to 6. CENTER WIDTH: This control adjust the center image so it may be heard only from the center speaker; only from the left/right speakers as a phantom image; or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7. 56