Denon AVR 689 Owners Manual - English - Page 26

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications ENGLISH 1. Speaker Setup Use this procedure to set the speakers manually or if you wish to change the settings made with the auto setup procedure. a ~ h Speaker Configuration j Subwoofer Mode Setup k ~ A5 Distance A6 ~ S1 Crossover Frequency S2 Test Tone S3 Restore a ~ h Speaker Configuration Select speaker configuration and size. (bass reproduction capability) [Display] 1.Sp 2.In 3.Op Q Speaker Setup Q 1 Front :Large Q 6 Subwoofer:Yes a Front Speaker Select front speaker size. [Selectable items] Large Small s Center Speaker Select center speaker use and size. [Selectable items] Large Small None d Surround Speaker Select surround speakers use and size. [Selectable items] Large Small None f, g Surround Back Speaker Select surround back speaker use and size. ( ) [Selectable items] Large Small None ( ) 2spkrs 1spkr NOTE By default, the AVR-689's "Amp Assign" setting is set to "ZONE2". To use as the surround back speaker for the main zone, change the "Amp Assign" setting (vpage 28). h Subwoofer Select subwoofer use. [Selectable items] Yes No • Select "Large" or "Small" not according to the physical size of the speaker but according to the low frequency reproduction capabilities based on the frequency set at "Crossover Frequency" (vpage 24). • When "Front Speaker" is set to "Small", "Subwoofer" is automatically set to "Yes". • If "Subwoofer" is set to "No", "Front Speaker" is automatically set to "Large". • If "Surround Speaker" is set to "None", "Surround Back Speaker" are automatically set to "None". • When "Front Speaker" is set to "Small", "Center Speaker" can not be set to "Large". • When using just one surround back speaker, connect it to the left channel (SBL). Large : S elect this when using large speakers with ample low frequency reproduction capabilities. Small : S elect this when using small speakers without ample low frequency reproduction capabilities. None : S elect this when no speaker is connected. Yes : S elect this when a subwoofer is connected. No : S elect this when no subwoofer is connected. 2spkrs 1spkr : Select the number of surround back speakers. Even when the Surround Back Speaker setting is other than "None", sound may not be emitted from the surround back speaker, depending on the playback source. In this case, make a "Surround Parameter" - "SB CH OUT" setting other than "OFF". (vpage 35) j Subwoofer Mode Setup Select low range signal to be reproduced by subwoofer. [Display] 1.Sp 2.In 3.Op Q Speaker Setup Q 7 SW Mode:Norm [Selectable items] Norm : Play low range and LFE signal of channels set to "Small". +Main : Play low range and LFE signal of all channels. • This can be set when "System Setup" - "Speaker Setup" - "Subwoofer" is set to "Yes". • Play music or a movie source and select the mode offering the strongest bass. • Select "+Main" if you want the bass signals to always be produced from the subwoofer. 23 For details on how to select, set and cancel settings for each menu, see "System setup operation" (vpage 22).