Denon DBP-1610 Owners Manual - English - Page 16

ENGLISH Introduction Connections Playback Connections • If "BD Audio Mode" is set to "HD Audio Output" or the BD title does not have secondary or interactive audio, the audio will be output as shown in the table. • If the "BD Audio Mode" is set to "Mix Audio Output" and the BD title has secondary or interactive audio, the audio will be output as follows: *1 Dolby Digital or Multi PCM (Only the independent substream is decoded.) *2 Dolby Digital or Multi PCM (Only the Dolby Digital substream is decoded.) *3 DTS or Multi PCM (Only the core substream is decoded.) *4 As shown in the table (Only the independent substream is decoded.) *5 As shown in the table (Only the Dolby Digital substream is decoded.) *6 As shown in the table (Only the core substream is decoded.) • If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as Multi PCM or 2ch Downmix PCM depending on the capability of the connected device, even if you select "HDMI Multi(Normal)" in "HDMI Audio Out" setting. Refer to page 32. Copyright protection system To play back the digital video images of a BD/DVD via an HDMI connection, it is necessary that both the unit and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the owner's manual of your display device (or AV amplifier) for more information. * HDMI: High-Definition Multimedia Interface Note • When using HDCP-incompatible display device, the image will not be viewed properly. • The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length) maybe limited by the device that is connected. • Among the monitors that support HDMI, some do not support audio output (e.g. projectors). In connections with device such as this unit, audio signals are not output from the HDMI output jack. Digital Connection to an AV Amplifier with Built-in Decoder audio digital audio coaxial cable DIGITAL AUDIO INPUT COAXIAL digital audio coaxial input jack COAXIAL AC IN COAXIAL ROOM TO ROOM DIGITAL OUT ( PCM / BITSTREAM ) COMPONENT VIDEO OUT ETHERNET HDMI OUT VIDEO OUT REMOTE CONTROL DIGITAL OUT 2ch AUDIO OUT R L ( PCM / BITSTREAM ) this unit Ⅵ Audio signals output from DIGITAL OUT (COAXIAL) When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that HDMI 2ch signal will be output from HDMI OUT jack, when connected device does not support Dolby Digital and DTS. < When HDMI is not connected or "Audio Mute" is selected···> Connections When HDMI is not connected or the "Audio Mute" is selected in "HDMI Audio Out" setting, the audio signals output from DIGITAL OUT changes depending on the "Digital Out" setting. Refer to the following table. To set "Digital Out", press [SETUP], then select "Quick" A "HDMI Audio Out" A "Audio Mute" or "Custom" A "Audio" A "HDMI Audio Out" A "Audio Mute". Disc type Audio recording format "Digital Out" setting Bitstream LPCM Dolby Digital Dolby Digital 2ch Downmix PCM Dolby Digital Plus Dolby Digital 2ch Downmix PCM*1 BD-Video Dolby TrueHD DTS Dolby Digital DTS 2ch Downmix PCM*2 2ch Downmix PCM DTS-HD DTS 2ch Downmix PCM*3 PCM 2ch Downmix PCM 2ch Downmix PCM Dolby Digital Dolby Digital 2ch Downmix PCM DVD-Video DTS DTS 2ch Downmix PCM PCM 2ch PCM 2ch PCM DTS-CD DTS 2ch Downmix PCM AVCHD Dolby Digital PCM Dolby Digital 2ch Downmix PCM 2ch Downmix PCM 2ch Downmix PCM DivX® Dolby Digital MP3/ MP2 Dolby Digital 2ch PCM 2ch Downmix PCM 2ch PCM audio CD/ MP3/ Windows Media™ Audio 2ch PCM 2ch PCM • This table applies only when HDMI is not connected or the "Audio Mute" is selected in "HDMI Audio Out" setting. • If "BD Audio Mode" is set to "HD Audio Output" or the BD title does not have secondary or interactive audio, the audio will be output as shown in the table. • If the "BD Audio Mode" is set to "Mix Audio Output" and the BD title has secondary or interactive audio, the audio will be output as follows: *1 Only the independent substream is decoded. *2 Only the Dolby Digital substream is decoded. *3 Only the core substream is decoded. Note • In order to output PCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set "BD Audio Mode" to "Mix Audio Output" and set "HDMI Audio Out" to "HDMI Multi(LPCM)". Cables not included. Please purchase the necessary cables at your local store. Function Setup Others 13 ENGLISH