Denon DBP-1610 Owners Manual - English - Page 37

ENGLISH Introduction Connections Playback Function Setup To make the most of its feature, set up your speakers appropriately by referring to the table below. Speaker setting options are available in SETUP A Quick A HDMI Audio Out A HDMI Multi(LPCM) or SETUP A Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM) How to navigate through the "HDMI Multi(LPCM)" setting 1) Use [U / V] to select the menu item. 2) Use [U / V] to select setting items. • Use [RETURN] to go back to the previous screen. 3) Use [Y / Z] to select desired options. (Except for "Test Tone" and "Default".) For "Test Tone": Use [Y / Z] to select "Manual" or "Auto", then press [ENTER]. • The test tone will be output. If you select "Manual", use [U / V] to select desired speaker, then use [Y / Z] to adjust the volume. If you select "Auto", use [Y / Z] to adjust the volume of the speaker that output the test tone. • If you want to stop the test tone, press [RETURN]. For "Default": Press [ENTER] to reset the "Speaker Configuration", "Channel Level" or "Delay Time" setting to the default. 4) Press [SETUP] to exit. Menu Speaker Configuration Select the desired speaker to set. Then change the setting appropriately by referring to the descriptions. Setting items Front Center Subwoofer Surround Surround Back Options Large* Small Large* Small On* Large* Small Large* Small Descriptions Large: For the large speakers with strong low frequency reproduction capabilities. Small: For the small speakers which do not provide strong bass sound. You cannot change the setting of "Subwoofer". If connected device is not compatible with subwoofer, "Subwoofer" will be displayed in gray. Default Select "Default", then press [ENTER] to reset the "Speaker Configuration" setting to the default. Function Setup • For "Speaker Configuration" setting, the settings of each speaker size may be adjusted automatically corresponding to each setting. (e.g. If "Front" is set to "Small", you cannot set "Center", "Surround" and "Surround Back" to "Large".) Menu Channel Level Tests or sets the volume for each speaker. Setting items Test Tone: "Test Tone" is the test tone which can be output from the speakers so that you can adjust the volume for each speaker. Front Lch Center Front Rch Surround Rch Surround Back Rch Surround Back Lch Surround Lch Subwoofer Default Options Off* Manual Auto 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) Descriptions Select "Off" to deactivate the "Test Tone" feature. Select "Manual", then press [ENTER] to manually set the volume for the desired speaker. Select "Auto",then press [ENTER] to automatically output the test tone from each speaker. If you have selected "Manual" in "Test Tone", select the desired speaker to set and adjust the volume for the selected speaker. If you have selected "Auto" in "Test Tone", test tone will be output automatically in order. Adjust the volume of the speaker that output the test tone. Select "Default", then press [ENTER] to reset the "Channel Level" setting to the default. Function Setup Others Remote control operation buttons : Displaying the menu Cancel the menu : Move the cursor (Up/Down/Left/Right) 34 ENGLISH : Confirm the setting : Return to previous menu