Denon S-301 Owners Manual - Page 21
tightly together into the connector. Arrow - speaker cable
UPC - 081757506748
View all Denon S-301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connecting Other Sources To change the speaker cable Refer to the procedure below if you want to switch to a different speaker cable. This example describes how to mount the "+" side cable to the connector. Mount the "-" side cable in the same way. q Insert the included hexagonal wrench into the hole at the side of the connector's "+" side. (Arrow A) w Turn the hexagonal wrench in the direction of arrow B to loosen the cable. e Pull out the old cable. Be careful not to leave any broken wire parts inside the connector. (Arrow C) r Peel off the cable's sheath and insert the new C D A BE cable with the copper colored core wire twisted tightly together into the connector. (Arrow D) t Turn the hexagonal wrench in the direction of Arrow E and tighten securely so that the cable cannot be pulled out. Be sure to connect both sides of the cable to the connectors with the proper polarities. If the polarities are inverted, the phase may be off and the bass sound may be missing, resulting in an unnatural sound. ENGLISH Connecting Other Sources Connecting the ROOM TO ROOM IN/OUT terminals These are the input/output connectors for wired remote control. Consult your DENON dealer if you wish to use this connector. Connecting the RS-232C terminal This terminal is used for an external controller. Consult your DENON dealer if you wish to use this connector. Connecting the TRIGGER OUT terminal • S-301 is equipped with 1 system of 12V TRIGGER OUT connections. An output can be activated upon the selection of assigned. DVD inputs or AUX1 inputs or AUX2 inputs. • Turn the DC 12V voltage on and off for the individual functions. ( page 57) Connecting the antenna terminals • An F-type FM antenna cable plug can be connected directly. • If the FM antenna cable's plug is not of the F-type, connect using the F-type antenna adapter (Option). FM outdoor antenna Direction of broadcasting station Black AM loop antenna White (Supplied) FM antenna 75 Ω/ohms COAXIAL cable adapter (Option) NOTE: • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure AM loop antenna lead terminals do not touch metal parts of the panel. Ground AM outdoor antenna 18 ENGLISH