Dewalt DW0330S Instruction Manual - Page 10

E Contents • User Safety • Battery Safety • Loading Batteries • Turning the Tool On • Choosing the Settings • Taking Measurements • Calibrating the Tool • Warranty • Error Codes • Specifications Retain all sections of this manual for future reference. User Safety WARNING: Carefully read the Safety Instructions and Product Manual before using this product. The person responsible for the product must ensure that all users understand and adhere to these instructions. WARNING: The following label information is placed on your laser tool to inform you of the laser class for your convenience and safety. DW0165 DW0165S 4.5V DC 4.5V DC DW0330S FCC ID: 2ANWF-DW0165 IC: 23237-DW0165 10 4.5V DC FCC ID: 2ANWFDW0330 IC: 23237-DW0330 DW0165 DW0165S 4.5V DC 4.5V DC FCC ID: 2ANWFDW0165 IC: 23237-DW0165 DW0330S 4.5V DC FCC ID: 2ANWFDW0330 IC: 23237-DW0330 The DW0165/DW0165S/DW0330S tool emits a visible laser beam, as shown in Figure A 1 . The laser beam emitted is Laser Class 2/3R per IEC 60825-1 and complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. WARNING: While the laser tool is in operation, be careful not to expose your eyes to the emitting laser beam (red light source). Exposure to a laser beam for an extended time period may be hazardous to your eyes. Do not look into the beam with optical aids.  WARNING: To reduce the risk of injury, user must read the Product User manual, Laser Safety manual, and Battery Safety information. FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.