EVGA 113-YW-E115-TR User Manual - Page 54
Storage Config - linux
View all EVGA 113-YW-E115-TR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Storage Config Press Enter to display the Storage Config menu. DMA transfer access Prefetch Mode HDD Block Mode SATA Controller SATA Operation Mode SATA SALP Features JMB363 ATA Controller JMB363 Mode [Enabled] [Enabled] [Enabled] [Enabled] [IDE] [OFF] [Enabled] [IDE] DMA transfer access Use this function to enable or disable DMA transfer access. Prefetch Mode Use this function to enable or disable the Prefetch mode. HDD Block Mode Using this function on the Integrated Peripherals menu allows your hard drive needs to support block mode. Select [Enabled] to automatically detect the optimal number of block read/writes per sector the drive can support. Select [Disabled] if your drive does not support block mode. SATA Controller This function allows you to enable specific SATA controllers, enable all controllers, or disable all controllers. SATA Operation Mode This is allows you set the onboard Serial SATA mode. ¾ IDE: Use the Serial ATA hard disk drivers as Parallel ATA storage devices. ¾ RAID: Create a RAID 0, 1, 0+1, 5 and JBOD configuration. ¾ AHCI: Use the AHCI (Advanced Host Controller Interface) to enables advanced SATA features for improved performance with NCQ and Hot-plug features ¾ Linux AHCI: Use the function for Linux AHCI. EVGA 44