Edimax IC-3116W Installation Guide - Page 7

Hardware Installation - setup

Get Edimax IC-3116W PDF manuals and user guides View all Edimax IC-3116W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

II. Hardware Installation Follow the instructions below to ensure your camera is properly connected and ready for setup. 1. Use an Ethernet cable to connect the network camera's LAN port to a router/switch/access point's LAN port, as shown below. 2. Connect the power adapter to the network camera's power port and to a power supply, as shown below. 3. Wait a moment for the camera to power on. The camera is ready when the green power LED displays on. Please refer to III. Camera Setup to setup your network camera. If the network camera cannot connect to the cloud server, the green power LED will flash slowly instead of display on (see I-3. LED Status). 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
7
II.
Hardware Installation
Follow the instructions below to ensure your camera is properly connected
and ready for setup.
1.
Use an Ethernet cable to connect the network
camera’s LAN port to a router/switch/access point’s
LAN port, as shown below.
2.
Connect the power adapter
to the network camera’s
power port and to a power supply, as shown below.
3.
Wait a moment for the camera to power on. The camera is ready when
the
green
power LED displays
on
. Please refer to
III. Camera Setup
to
setup your network camera.
If the network camera cannot connect to the cloud server, the
green
power LED will
flash slowly
instead of display
on
(see
I-3.
LED Status
).