Electrolux E30EW85PPS Complete Owners Guide English - Page 31
Adjusting the Oven Temperature, Restoring Control to Factory Default Settings
View all Electrolux E30EW85PPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Setting Oven Controls 31 Adjusting the Oven Temperature Your appliance has been factory calibrated and tested to ensure accurate baking temperatures. For the first few uses, follow your recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, the control may be adjusted so the oven cooks hotter or cooler than the temperature displayed. The temperature may be increased +35°F (+19°C) or decreased -35°F (-19°C) by adjusting the User Programmable Offset (UPO). IMPORTANT! Do not use oven thermometers such as those found in grocery stores to check the temperature settings inside your oven. These oven thermometers could vary as much as 20º to 40º from actual oven temperatures. How to offset the oven temperature by +30°F: 1. Select UPPER or LOWER OVEN. 2. Press user pref until UPO appears in the display. The default setting of 0 (zero) should display next to UPO. To increase the oven to cook 30 degrees hotter, press the hi + key until the UPO shows 30 in the oven selected. 3. To accept change, press START. 4. Press CANCEL to return the oven to programming mode. Restoring Control to Factory Default Settings Your appliance is set with a number of predetermined oven control settings. Over time you may make changes to the original factory settings. The following functions or features have user programmable options or adjustments that may have been changed from the default settings. • Clock 12-hour or 24-hour display mode • 12-Hour Energy Savings or continuous bake mode • Tone volume • Oven temperature display mode (F° or C°) • Any oven temperature adjustment made • Any saved my favorite recipes IMPORTANT! Before restoring, be aware that any previous changes made to the oven control settings will be erased once the keypad is pressed. This includes any temperature offset made for the oven. To restore factory default settings: 1. Press user pref key until rSt no or rSt YES appears in the display (Figure 29). 2. Press hi + until rSt yES appears in the display. Press START to accept. Figure 27: Oven temperature offset by +30° How to offset oven temperature by -30°F: 1. Select UPPER or LOWER OVEN. 2. Press user pref until UPO appears in the display. To decrease the oven to cook 30 degrees cooler, press the lo - key until the UPO shows - 30. 3. To accept change, press START. Figure 29: Display showing the options to reset to default (rSt yes) or to reject resetting to default (rSt no) Figure 28: Oven temperature offset by -30° Oven temperature adjustments made by changing the UPO setting will not affect the broil or clean feature temperatures. UPO settings can be made for each oven individually.