Electrolux E30EW85PPS Complete Owners Guide English - Page 36
General Cleaning, Aluminum Foil and Oven Liners, Replacing the Oven Lights
View all Electrolux E30EW85PPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
36 Care and Cleaning General Cleaning Before manually cleaning any part of the oven, be sure all controls are turned off and the oven is cool. Aluminum Foil and Oven Liners Do not use oven bottom liners or use aluminum foil to cover the oven racks. Protective liners-Do not use aluminum foil to line the oven bottom, except as suggested in the manual. Improper installation of these liners may result in a risk of electrical shock, or fire. Using a liner in the oven restricts the heat and air flow needed to obtain the best possible cooking results for any oven. During clean the oven temperature can become hot enough to melt aluminum cooking utensils or aluminum foil if left in the oven. This could result in permanent damage to the oven interior and porcelain finish. Replacing the Oven Lights Replacing the Dual Left and Right Corner Oven Lights There are two interior oven lights located at the rear of the oven cavity and are covered with a glass shield. The glass shield must be in place whenever the oven is in use (Figure 35). Replacing the Dual Left or Right Side Oven Lights An interior oven light will turn on automatically when the oven door is opened. The oven light may be turned on when the door is closed by using the oven light switch located on the control panel. The lamp is covered with a glass shield. The glass shield can be remove to be cleaned manually or to change the oven light. To replace the oven interior light bulb: Be sure the range is unplugged and all parts are cool before replacing oven light. Wear a leather-faced glove for protection against possible broken glass. 1. Turn electrical power off at the main source or unplug the appliance. 2. To remove the glass shield, pull the back side of the shield toward the inside of the oven in a manner to lift it up from the oven side. The glass shield should come out easily by pushing a little toward front of the wall oven (See Figure 36). 3. Replace the Halogen appliance bulb. To replace the oven interior light bulb: Be sure the oven is unplugged and all parts are cool before replacing oven light.Wear a leather-faced glove for protection against possible broken glass. 1. Turn electrical power off at the main source or unplug the appliance 2. Remove interior oven light shield by turning a quarter turn counter-clockwise. 3. Replace bulb with a new T-4 type Halogen 25 watt appliance bulb. Do not allow your fingers to touch the new bulb when replacing. This will shorten the life of the new bulb. Use a paper towel to cover the new bulb when installing. 4. Replace glass interior oven light shield. 5. Turn power back on again at the main source (or plug the appliance back in). 6. Be sure to reset the time of day on the clock. Halogen Light Bulb Lift backside of glass shield and remove it. Figure 36: Light shield (L) and Halogen bulb (R) Figure 35: Oven light in rear of cavity Do not allow your fingers to touch the new bulb when replacing. This will shorten the life of the bulb. Use a paper towel or cotton glove while handling the new bulb when installing. 4. Replace glass oven light shield by rotating clockwise. 5. Turn power back on again at the main source (or plug the appliance back in). 6. Reset the time of day on the clock.