Electrolux E42BS75EPS Owners Guide - Page 20

Installation Instructions CUSTOMIZATION BASICS: Stainless Steel Wrapped Models Stainless Steel Wrapped Refrigerators Stainless Steel wrapped refrigerators have wrapped doors and grille panels, and beveled edges. These models are shipped ready for installation. Trimmed Models Trimmed Refrigerator Panels Trimmed refrigerators are designed to be customized with decorative panels. Field installed custom door and grille panels are required. There are three custom panel options. You can install a 1/4″ framed panel, a 3/4″ framed custom panel or a 3/4″ fullwidth overlay custom panel. 1/4″ Framed Panels You may install 1/4″ thick custom panels from your cabinet manufacturer. The decorative panel slides into the factory installed trim. 3/4″ Framed Custom Panels 3/4″ framed custom panels are secured to a 1/4″ finished backer panel. They are designed to slide into the factory installed trim, no kits required. The backer panel will be exposed on the handle side and therefore must be finished. 3/4" Custom Panel Door Handles 3/4″ Full-Width Overlay Custom Panels 3/4″ full-width overlay custom panels are designed to slide into the factory installed trim, no kits required. In this design, you can achieve a nearly trimless appearance. A spacer panel must be installed between the finished backer and appearance panel. The backer panel will be exposed on the handle side and therefore must be finished. Framed Panel Door Handles 3/4" Overlay Panel .10" Thick Spacer Panel 1/4" Thick Backer Panel Door Handles On Trimmed Refrigerators The handles can be used to accommodate both framed or custom panels. NOTE: For 3/4″ custom panels, please refer to diagrams on page 23 for optimum handle clearance. 20