Electrolux E42BS75EPS Owners Guide - Page 5

Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support About the temperature controls. ElectroluxUSA.com The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings. The actual temperature may vary slightly from the set temperature based on usage and operating environment. NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now. To change the temperature, press and release the up or down arrow button. To change the temperature, tap either the up arrow for warmer temperatures or the down arrow for colder temperatures until the desired temperature is displayed. Refrigerator temperatures can be adjusted between 34 °F and 47°F and the freezer temperatures can be adjusted between -6 °F and + 8°F. Once the desired temperature has been set, the temperature display will clear after 60 seconds. To display the temperature, the Disp Temp button may be tapped. Several adjustments may be required. Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set. Performance Air Flow System The Performance Air-Flow System is designed to maximize temperature control in the refrigerator and freezer compartments. This unique special feature consists of the Air Tower along the back wall of the refrigerator and the freezer. Placing food in front of the louvers on these components will not affect performance. 5