Electrolux E42BS75EPS Owners Guide - Page 27

Installation Instructions SIDE PANELS Side panels (not supplied) must be used whenever the sides of the refrigerator will be exposed. The 1/4″ side panels will slip into the side case trim. Order side panels from your cabinet manufacturer. *Depending on installation height. 24" *84" *3" to 4" 1-1/2" FLOORING For proper installation, this refrigerator must be placed on a level surface of hard material that is at the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 1500 lb. NOTE: Protect the finish of the flooring. Cut a large section of the cardboard carton and place under the refrigerator where you are working. GROUNDING THE REFRIGERATOR IMPORTANT-Please read carefully FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED. The power supply cord of this appliance is equipped with a three-prong (grounding) plug which mates with a standard threeprong (grounding) wall receptacle to minimize the possibility of electric shock hazard from this appliance. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD. DO NOT USE AN ADAPTER PLUG TO CONNECT THE REFRIGERATOR TO A 2-PRONG OUTLET. DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE. 27