Electrolux EIGD55IKG Installation Instructions - Page 24

Reversing Door L) Reversing Trim Ring 1 Trim ring orientation is marked on the back. 2 Remove trim ring cover plate. To remove plate from left, pivot point is down. To remove plate from right, pivot point is up. M) Reinstalling Trim Ring 1 Close door. 2 Orient trim so 12 position is approximately 3/4"to the left of top center. Opening in ring should be on the hinge side. 3 Insert trim ring in slots and rotate clockwise approximately 3/,,,. Rotate and move trim ring cover plate to opposite opening in trim and reinsert. N) Reinstalling Trim Plug 1 Open door to 90 degree angle. 2 Install trim plug with 1 long, course-thread, panhead screw. O) Plug in dryer and continue operation.