Epson 2000P Printer Basics - Page 16

Making Paper Settings Now click the Paper tab to display the settings shown below: Click here Select Sheet Feeder for printing on single sheets of paper Select the size of paper you loaded Make the following selections: s Set the Paper Source to Sheet Feeder if you're printing on single sheets of paper. If your image is at least as wide as the paper, you can print it edge-to-edge ("bleed" it to the left and right sides of the page) by selecting Sheet Feeder-No Margins (available only at certain paper widths: 4, 8.3, 8.5, and 13 inches). To print on roll paper, see "Using Roll Paper" on page 27. s Choose the size of paper you're printing on (click the arrow to scroll through the Paper Size list). Click OK to apply the new settings. Then do one of the following: s If you see your application's Print dialog box, continue with the next section. s If you see a dialog box with a different name (such as Page Setup in Photoshop), click OK again. Then select Print from the File menu. It's a good idea to check your settings before printing. Some applications can override your printer's Paper Size and Orientation settings. If so, you may have to reapply these settings before printing. For details on other options-such as printing on custom paper sizes and choosing image orientation-see your electronic Reference Guide (described on page 2). 11