Epson 2000P Printer Basics - Page 51
Transporting the Printer - cable
UPC - 010343838550
View all Epson 2000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
6. Wipe off ink from the rollers using the dampened cleaning tool as shown. If the paper ejects before you finish cleaning, press the E load/eject button to feed another sheet into the printer. 7. When you're finished, turn the printer off. Transporting the Printer If you move your printer some distance, you need to prepare it for transportation in its original box or one of a similar size. Follow these steps: To avoid damage, always leave the ink cartridges installed when transporting the printer. Be sure to remove the tape used in step 4 after setting up the printer in its new location. 1. Turn on the printer, wait until the print head locks in the far right position, then turn off the printer. Tape the ink cartridge holder to the printer case 2. Unplug the power cord from the electrical outlet. Then disconnect the printer cable from the printer. 3. Remove any paper from the printer and remove the paper support. 4. Open the printer cover. Secure the ink cartridge holder to the printer with tape as shown, then close the printer cover. 5. Close the cover, push in the output tray extensions, and close the tray. 6. Repack the printer and attachments in the original box using the protective materials that came with it. Keep the printer level as you transport it. After transporting it, remove the tape securing the print head and test your printer. If you notice a decline in print quality, clean the print head (see page 37) or align the print head (see page 43). 46