Epson 2000P Printer Basics - Page 40
Printing on Paper Cut from a Roll
UPC - 010343838550
View all Epson 2000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Printing on Paper Cut from a Roll If you want to print on paper cut from a roll without using the roll paper holder, follow these steps: 1. Before loading the paper, cut it to the desired length of your image plus two inches for the necessary margins. Cut the edge cleanly, at a 90-degree angle in each corner, to ensure proper loading. If you alter the paper's width before printing, you may not be able to print edge-to-edge; marginless printing is available only at certain paper widths (4, 8.3, 8.5, and 12.95 inches). 2. To make loading easier, roll the first several inches of the paper backward to uncurl it. Use the plastic sheet included with your printer to prevent your hands from marring the printable surface. (Or you can just use a folded sheet of paper.) 3. Remove the printer's paper support and insert the cut sheet, printable side up, as far as it will go. Slide the left edge guide against the paper. 35