Epson 2000P Printer Basics - Page 36

You see your printer's Properties dialog box: 5. Click the Main tab, if necessary. Select the correct Media Type setting for your paper. (If you're not sure which setting to use, see "Choosing the Correct Media Type Setting" on page 25.) Also make sure the PhotoEnhance setting is turned off, or it could affect your margins. Click here Select the correct Media Type setting for your paper Make sure PhotoEnhance is turned off 6. Click the Paper tab. 7. Select these settings: s Roll Paper as the Paper Source; this leaves a margin of at least 0.12 inch (3 mm) on both sides of your printout Click here Select an option for roll paper Choose a Page Size that matches your document's size or Roll Paper-No Margins if you want to print your image edge-to-edge (available only at certain paper widths: 4, 8.3, 8.5, and 13 inches). Select Banner Mode s Choose a Page Size that matches the size of the document you created in your application. (If necessary, select User Defined as the Page Size, then enter your document size and give it a name.) s Select Banner Mode as the Roll Paper Option. If you're printing more than one copy of the image and you want to print a cutting line between copies, select Cut Sheet Mode, then click the Print page frame checkbox. 31