Epson 2000P Printer Basics - Page 53

lights come on, jammed paper may be blocking movement of the print, head. Turn off the printer

Get Epson 2000P - Stylus Photo Color Inkjet Printer PDF manuals and user guides
UPC - 010343838550
View all Epson 2000P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

P is on S flashes S is on B or A flash B or A are on P and S flash and B and A are on P S B A flash P S B A are off The Ppower light is on when the printer is ready to print. It flashes when the printer is receiving a print job, charging ink, or cleaning the print head. When the S paper out light flashes, you have a paper jam. Press the E load/eject button to try to clear the jam. If that doesn't work, turn off the printer and gently pull out all the paper. Make sure none of the sheets are curled, creased, old, stuck together, or too thin. Then reload the paper against the right edge guide and slide the left edge guide against it. Turn on the printer and press the E load/eject button to resume printing. (If you're using roll paper, see page 28 for additional loading instructions.) When the S paper out light comes on, your paper is out or incorrectly loaded. Make sure none of the sheets are curled, creased, old, stuck together, or too thin. Then reload the paper against the right edge guide and slide the left edge guide against it. Press the E load/eject button to resume printing. (If you're using roll paper, see page 28 for additional loading instructions.) When an ink out light flashes, your ink supply is low. Make sure you have a replacement cartridge. When an ink out light comes on, you need to replace the ink cartridge. Make sure you have a replacement cartridge. See page 40 for replacement instructions. If an ink out light comes on after you've replaced a cartridge, you installed a cartridge your printer can't use. Remove it and replace it with the correct type. When the Ppower and S paper out lights flash, and both of the ink out lights come on, jammed paper may be blocking movement of the print head. Turn off the printer, open the cover, and check inside for any jammed paper. Then turn the printer back on. If the lights still flash and come on, contact your dealer or EPSON; see page 59 for information. When all the lights flash, your printer may have an internal error. Make sure you removed all the packing material as described on the Start Here poster in your printer box. Then turn off the printer, wait a few seconds, and turn it on again. If the lights still flash, contact your dealer or EPSON; see page 59 for contact information. When all the lights are off, the printer is not receiving power. Try these solutions: s Make sure the printer is turned on. s Turn off the printer, plug in the power cord securely, and turn on the printer again. s Make sure the outlet is operable and is not controlled by a switch or timer. If in doubt, try using another outlet. 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
48
P
is on
The
P
power light is on when the printer is ready to print. It flashes
when the printer is receiving a print job, charging ink, or cleaning the
print head.
S
flashes
When the
S
paper out light flashes, you have a paper jam. Press the
E
load/eject button to try to clear the jam. If that doesn’t work, turn off
the printer and gently pull out all the paper. Make sure none of the
sheets are curled, creased, old, stuck together, or too thin. Then reload
the paper against the right edge guide and slide the left edge guide
against it. Turn on the printer and press the
E
load/eject button to
resume printing. (If you’re using roll paper, see page 28 for additional
loading instructions.)
S
is on
When the
S
paper out light comes on, your paper is out or incorrectly
loaded. Make sure none of the sheets are curled, creased, old, stuck
together, or too thin. Then reload the paper against the right edge
guide and slide the left edge guide against it. Press the
E
load/eject
button to resume printing. (If you’re using roll paper, see page 28 for
additional loading instructions.)
B
or
A
flash
When an ink out light flashes, your ink supply is low. Make sure you
have a replacement cartridge.
B
or
A
are on
When an ink out light comes on, you need to replace the ink cartridge.
Make sure you have a replacement cartridge. See page 40 for
replacement instructions. If an ink out light comes on after you’ve
replaced a cartridge, you installed a cartridge your printer can’t use.
Remove it and replace it with the correct type.
P
and
S
flash
and
B
and
A
are on
When the
P
power and
S
paper out lights flash, and both of the ink out
lights come on, jammed paper may be blocking movement of the print
head. Turn off the printer, open the cover, and check inside for any
jammed paper. Then turn the printer back on. If the lights still flash and
come on, contact your dealer or EPSON; see page 59 for information.
P
S
B
A
flash
When all the lights flash, your printer may have an internal error. Make
sure you removed all the packing material as described on the
Start
Here
poster in your printer box. Then turn off the printer, wait a few
seconds, and turn it on again. If the lights still flash, contact your dealer
or EPSON; see page 59 for contact information.
P
S
B
A
are off
When all the lights are off, the printer is not receiving power. Try these
solutions:
■
Make sure the printer is turned on.
■
Turn off the printer, plug in the power cord securely, and turn on
the printer again.
■
Make sure the outlet is operable and is not controlled by a switch
or timer. If in doubt, try using another outlet.