Epson 875DC Printer Basics - Page 76
Follow the guidelines below when you check the control panel lights.
View all Epson 875DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Follow the guidelines below when you check the control panel lights. P is on S flashes and B and A are on S is on B or A flash B or A are on P and S flash and B and A are on P S B A flash The Ppower light is on when the printer is ready to print. It flashes when the printer is receiving a print job, charging ink, or cleaning the print head. When the S paper out light flashes and both ink out lights come on, you have a paper jam. Press the E load/eject button to try to clear the jam. If that doesn't work, turn off the printer and gently pull out all the paper. Make sure none of the sheets are curled, creased, old, stuck together, or too thin. Then reload the paper against the right edge guide and slide the left edge guide against it. Turn on the printer and press the E load/eject button to resume printing. (If you're using roll paper, see page 27 for additional loading instructions.) When the S paper out light comes on, you're out of paper or your paper is incorrectly loaded. Make sure none of the sheets are curled, creased, old, stuck together, or too thin. Then reload the paper against the right edge guide and slide the left edge guide against it. Press the E load/eject button to resume printing. (If you're using roll paper, see page 27 for additional loading instructions.) When an ink out light flashes, your ink supply is low. Make sure you have a replacement cartridge. When an ink out light comes on, you need to replace the ink cartridge. Make sure you have a replacement cartridge. See page 63 for replacement instructions. If an ink out light comes on after you've replaced a cartridge, you installed a cartridge your printer can't use. Remove it and replace it with the correct type. When the Ppower and S paper out lights flash, and one or both of the ink out lights come on, jammed paper may be blocking movement of the print head. Turn off the printer, open the cover, and check inside for any jammed paper. Then turn the printer back on. If the lights still flash and/or come on, contact your dealer or EPSON; see page 86 for information. When all the lights flash, your printer may have an internal error. Make sure you removed all the packing material as described on the unpacking sheet in your printer box. Then turn off the printer, wait a few seconds, and turn it on again. If the lights still flash, contact your dealer or EPSON; see page 86 for contact information. 70