Epson ActionPrinter 4500 User Manual - Page 221

Paper Handling Problem Continuous paper does not feed properly (continued). The paper feed is crooked or the paper jams (continued). Regular gaps occur in the printout. Skip over perforation does not function. Solution The sprocket lock levers may be unlocked, or the sprocket covers may be open. Position the sprocket units to match the width of your paper. Then, lock them in place by pressing the sprocket lock levers away from you. See Chapter 2. The paper guide may be in the upright position. When using continuous paper, make sure that the paper guide is in the lowered position so that it can act as a paper separator. See Chapter 2. The paper thickness lever may be in the wrong position. For printing on ordinary paper, always set the lever to position 2. The paper dimensions may exceed the specified limitations. Use only paper sizes that are within the specified range. Your printer can print on continuous multi-part forms consisting of 1 original and 1 or 2 copies. See Chapter 8. Skip over perforation may be interfering with your application program settings. Set DIP switch 2-3 to off. You may not have turned off the power after setting DIP switch 2-3 to on. To make new DIP switch settings effective, turn the power off, then on again. Troubleshooting 7-19