Epson ActionPrinter 4500 User Manual - Page 90

Skip Over Perforation By changing the setting of DIP switch 2-3, you can set skip over perforation to on or off. If this feature is on when using continuous paper, a one-inch margin is provided between the last printable line on one page and the first printable line on the next page. This feature is very convenient if your application program does not provide for top and bottom margins. If you adjust your loading position correctly, you can get half of the margin at the bottom of one page and half at the top of the next page, as shown in the following illustration. DIP switch 2-3 ON (Skip over perforation ON) 0 23456789: ;?@ABCDEFGHIJKLMNOPQRSTUVWXYZI\) 3456789:;?@ABCDEFGHIJKLMNOPQRSTUVwXYZ[\]-- 0 0 456789: ;?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\l0 56789:; ?@?ABCDEFGHIJKLMNOPQRSTUVWXYZ[\I^_T( 6789: ;?@ABCDEFGHIJKLMNOPQRSTUVWXYZt\l*-'d Note: Most application programs take care of top and bottom margins. Use skip over perforation only if your program does not provide these margins. The skip over perforation setting can be set to values other than one inch by using the ESC N command. See the Command Summary in LChapter 9 for details. Using the Printer 3-11