Epson BrightLink 1480Fi Installation Guide - Page 51
Adjust the vertical slide position of the arm, Tightening the M8 hexagon bolt lowers the wall mount
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
English F Adjust the vertical slide position of the arm 1. Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount ( ), or the hexagonal shaft at the top of the wall mount ( ). Start by aligning the notch on the arm with the alignment mark on the wall plate as shown below ( ). Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it ( ). Tightening the hexagonal shaft raises the wall mount, and loosening the shaft lowers it ( ). 2. Secure the wall mount with the M6 × 20 mm hexagon shoulder bolt. 51
51
English
F
Adjust the vertical slide position of the arm
1.
Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount (
), or the
hexagonal shaft at the top of the wall mount (
). Start by aligning the notch on the arm with the
alignment mark on the wall plate as shown below (
).
Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it (
).
Tightening the hexagonal shaft raises the wall mount, and loosening the shaft lowers it (
).
2.
Secure the wall mount with the M6 × 20 mm hexagon shoulder bolt.