Epson BrightLink 1480Fi Installation Guide - Page 95
Installing the pen stand, Attach the front cover, Secure the pen stand
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
English F Attach the front cover Installing the pen stand The pen stand is included with the BrightLink 1485Fi/1485Fi+/EB-725Wi/EB-735Fi. You can secure the pen stand with commercially-available M4 screws (not included) or the attached magnets. A Secure the pen stand: • If your whiteboard is magnetic, you can use the magnets on the back of the pen stand to secure it. You need to leave a gap of at least 3.9 inches (100 mm) between the pen stand and the left or right side of the projected image or the touch feature may not function properly. If you are unable to leave this gap, install the pen stand on the wall next to the whiteboard. • If you don't have a magnetic whiteboard or are unable to fit the pen stand on the whiteboard with the proper gap around the projected image, use commercially-available M4 screws (not included) to secure it to the wall. 95