Epson BrightLink 1480Fi Installation Guide - Page 92
Installing the HDBaseT Control Pad and Pen Stand, Check the installation location
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
9 Installing the HDBaseT Control Pad and Pen Stand You must install the projector before installing the control pad and pen stand. Caution The control pad should only be connected to the BrightLink 1485Fi/1485Fi+ and PowerLite EB-800F/EB-805F. Do not connect the control pad to any other projectors. Previous Epson control pad models do not support HDBaseT. Check the installation location Make sure there is enough space surrounding the control pad to easily connect or disconnect cables. If you are using the touch unit, make sure that you do not install the control pad or pen stand in the shaded areas of the following figure. The touch unit will not operate correctly if anything is obstructing the infrared signal. 4.0 in. (100 mm) 4.0 in. (100 mm) 0.8 in. (20 mm) Installing the HDBaseT Control Pad The Control Pad is included with the BrightLink 1485Fi/1485Fi+ and is an optional accessory for the PowerLite EB-800F/EB-805F. A Remove the front cover Grip the hole in the top of the cover and remove it. 92