Epson BrightLink 1480Fi Installation Guide - Page 90
adjustment. If other objects are on the projected image, angle adjustment may not
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
7. Attach the two markers to the positions shown on the projected screen. Match the positions so that the crosses ( ) overlap with the points ( ) on the marker positions. Move the marker over the projected cross until the lines of the cross align with the lines on the marker. Attach the markers to the projection screen as follows: • For magnetic screens: Place the bottom of the markers onto the screen. • For non-magnetic screens: Use the supplied tape to secure the markers. Do not place anything other than the markers near the projected image during angle adjustment. If other objects are on the projected image, angle adjustment may not be performed correctly. 8. Press the [Enter] button on the remote control or control panel to begin the auto adjustment. 9. When adjustments are complete, remove the markers. If auto adjustment fails, follow the instructions on the screen to manually adjust the bracket position and run auto adjustment again. 90