Epson BrightLink 1480Fi Installation Guide - Page 87
BrightLink 1480Fi/1480Fi+/1485Fi/1485Fi
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
English 5. Set Power to On. The touch unit power turns on and the indicator light turns blue. Warning Do not look into the projector's projection window or the touch unit's laser diffusion ports (located on the bottom of the touch unit); this could cause injury to eyesight. When Power is set to On, the touch unit automatically powers up the next time the projector is turned on. H Adjust the angle Adjust the angle of the laser light coming from the touch unit so that the touch unit can detect the position of your fingers. Make sure to calibrate the interactive pen(s) before running touch unit setup. Press the User button on the remote control and select Yes to perform an auto-calibration. Refer to the online User's Guide for your projector for detailed instructions on calibrating the pen(s). 1. Press the [Menu] button on the remote control or control panel. BrightLink 1480Fi/1480Fi+/1485Fi/1485Fi+: Remote Control Control Panel BrightLink EB-725Wi/EB-735Fi: Remote Control Control Panel 87