Epson C11C417001 Printer Basics - Page 42

Removing and Installing Ink Cartridges Be sure you have a new ink cartridge before you begin. Once you start replacing a cartridge, you must complete all the steps in one session. 1. Make sure the printer is turned on (the green P power light should be on, but not flashing). Then open the printer cover. 2. Press the e ink cartridge replacement button. The print head moves to the center and the green P power light flashes. The red b error light also begins to flash or remains on. I If it flashes at the same speed as the green P power light, replace the black cartridge. I If it flashes twice as fast as the green P power light, replace the color cartridge. I If it remains on, replace both cartridges. 3. The color cartridge is on the right and the black is on the left. Pull up the ink cartridge clamp. The cartridge rises up from its holder. 4. Lift the cartridge out of the printer and dispose of it carefully. 5. Unwrap the new ink cartridge. Then remove only the yellow tape seal on top. Caution: You must remove the yellow tape from the top of the cartridge or you will permanently damage it. Don't touch the green circuit board on the back of the cartridge; you may inhibit normal operation and printing. black cartridge color cartridge don't touch the green circuit boards Maintaining Your Printer 37