Epson C11C417001 Printer Basics - Page 55

Paper Problems Paper doesn't feed correctly or jams in the printer. I If paper doesn't feed, remove it from the sheet feeder. Fan the edges of the sheets, reload them against the right edge (beneath the tab), then slide the left edge guide to fit lightly against the paper. I If paper jams, press the b maintenance button to clear the jam. If necessary, open the cover and remove any jammed or torn pieces. Load new paper and press the b maintenance button. Paper doesn't eject fully or is wrinkled. I If the paper doesn't eject fully, you may have set the wrong paper size. Press the b maintenance button to eject the paper, then select the correct paper size. I If it's wrinkled when it ejects, the paper may be damp or too thin. Load new paper. 50 Solving Problems Miscellaneous Problems The image is inverted, as if viewed in a mirror. Turn off Mirror Image (Windows) or Flip Horizontal (Macintosh) in the printer software, or the mirror setting in your program. (If you're printing on EPSON Iron-On Transfer Paper, the image should be inverted.) The printer prints blank pages. I Make sure your printer is selected in the Print window, or the Macintosh Chooser or Print Center. I Clean the print head; see page 33 for instructions. You see incorrect characters. I Make sure the interface cable is securely connected at both ends and meets the system requirements on page 63. I Make sure your printer is selected in the Print window, or the Macintosh Chooser or Print Center. I If you're using a switch box or USB hub with your printer, connect the printer directly to your computer instead.