Epson ColorPage 8000 Quick Start - Page 12

Error message list (continued) Messages Description Mem Overflow The printer doesn't have enough memory available for the current print job. Action Press the Continue button on the control panel. If the message remains, reset the printer by holding down the Alt and Reset buttons. Replace Oil Roll Replace Photocondctr Replace Waste T Box The fuser oil roll is empty. The photoconductor unit has reached the end of its service life. The waste toner collector is full. If the same message appears when you try printing again, you may need to reduce the number or size of graphics or fonts, lower the resolution, or add memory to your printer. Replace the fuser oil roll (see page 4). Replace the photoconductor unit (see page 2). Replace the waste toner collector (see page 3). Error message list (continued) Messages Toner Out Service req e Description Action The indicated toner cartridge is empty. Replace the indicated toner cartridge (see page 1). A controller error or a print engine error has been detected. Write down the error number and turn off the printer. Wait at least 10 seconds and then turn it back on. If this error still appears, turn off the printer, unplug the power cord, and contact your dealer. 10