Epson EMP 50 User Manual - Page 64
Resetting the Lamp Timer
UPC - 010343832626
View all Epson EMP 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Resetting the Lamp Timer You must reset the lamp timer after replacing the lamp to clear the LAMP REPLACE warning message. Follow the directions below to reset the lamp timer: 1. Turn on the projector. 2. Press the Menu button on the remote control. You see the main menu. 3. Use the directional buttons to highlight About, then press the Enter button. You see the following: Lamp : 1400H Reset Lamp T: imer Execute Video Source : Computer Input Signal : RGB Frequency : H ---.--kHz : V ---.--Hz SYNC Polarity : H -----: V ------ SYNC Mode Resolution : -----: 0x 0 Refresh Rate : 0.0 Hz 4. Press Enter to select the Reset Lamp Timer option. You see the following: Reset Lamp Timer Execute? YES NO 5. Use the directional buttons to select YES and press Enter. 6. Press Esc to return to the main menu. 7. Press Esc again (or the Menu button) to exit the menu system. 58 Maintaining and Transporting the Projector