Epson Equity II Product Support Bulletin(s) - Page 37
Epson, Product Support Bulletin
View all Epson Equity II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
EPSON EPSON AMERICA INC. SERVICE DEPARTMENT PRODUCT SUPPORT BULLETIN DATE: 3/28/88 NUMBER: S-0041 SUBJECT: EPSON EQUITY I/II/III ENHANCED KEYBOARD COMPATIBILITY The purpose of this bulletin is to provide information regarding the compatibility of third party enhanced "AT" style keyboards with the Equity I, Equity II and Equity III computers. 1. Keyboard Compatibility The enhanced Equity "Plus" series keyboard cannot be used on an Equity I, II or III. The enhanced Equity keyboard (as with IBM's) requires explicit ROM BIOS support which is not available in the earlier machines. It is possible, however, to use a third-party "enhanced-style" keyboard such as the IBM XT-101, NorthGate C/T-101, Datadesk Turbo-101, Keytronics 101, 5150 and 5151. Please note that early versions of the Equity I (serial numbers unavailable) and Equity II (below serial number 29875) were not designed to support any third party keyboards (they do not have any keyboard-select jumpers on the main board). The correct jumper settings for non-Epson keyboards are: Equity I: Equity II: J2 and J3 jumpered J3, J4 and J5 set for position 1 PLEASE NOTE Once the above jumper changes have been made, attempting to use the original Epson keyboard will result in damage to the keyboard and Equity main board. Page 1 of 1