Epson Equity II Product Support Bulletin(s) - Page 65
provide, Product Code Q390A-AA, RESET., ENTER., message, SYSTEM TRANSFERRED., path].
View all Epson Equity II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
EPSON EPSON AMERICA INC. SERVICE DEPARTMENT PRODUCT SUPPORT BULLETIN DATE: 3/9/88 SUBJECT: MS-DOS 3.2 FOR THE EQUITY I/II/III NUMBER: S-0014A The purpose of this bulletin is to provide information on the availability of MS-DOS 3.2 for Equity I, Equity II and Equity III systems. Also included are instructions for installing MS-DOS 3.2 on hard drive systems currently using earlier revisions of MS-DOS. The Equity I+ MS-DOS 3.2 package has been certified for use with the Equity I, Equity II and Equity III. This software is now available for customers who wish to upgrade their system. It can be ordered under Product Code Q390A-AA - $85.00 retail. This package includes MS-DOS 3.2/GW-BASIC software with documentation for the Equity I+. The following is a simple procedure to perform the transfer of the new MS-DOS 3.2 files to an existing hard disk system. 1. Insert the MS-DOS 3.2 diskette into drive A. 2. If the system is powered up, press RESET. If not, turn the system on. 3. At the A> prompt, type SYS C: and press ENTER. The system will respond with the message, SYSTEM TRANSFERRED. 4. At the A> prompt, type REPLACE A:\*.* C:\ /S and press ENTER. This will replace the existing MS-DOS files with version 3.2 files. 5. At the A> prompt, type REPLACE A:\*.* C:\[path] /A and press ENTER. This will copy new MS-DOS files to the subdirectory indicated by [path]. 6. Remove the MS-DOS diskette and insert the GW-BASIC diskette into drive A. 7. At the A> prompt, type C: and press ENTER. 8. Repeat steps 4 and 5 above. (Prompt, listed in steps 4 and 5 as A>, will now be C>.) 9. Remove the GW-BASIC diskette from the drive. Put the original diskettes in a safe place for storage. Page 1 of 1