Epson FX-286e User Manual - Page 16
and close the cover., Setting Up Your FX Printer - ribbon
View all Epson FX-286e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Figure 1-8. Open pin-feed cover 4. Guide the paper into the paper slot, and push it through until it comes up between the ribbon guide and the platen. (Moving the paper with a side-to-side motion makes it easier to push the paper through.) 5. Pull the paper up until the top is above the pin-feed holders. Fit the holes on the left side of the paper over the pins in the left holder (as shown in Figure 1-9) and close the cover. Figure 1-9. Fitting the paper over the pin feeds Setting Up Your FX Printer 1-9
Figure 1-8.
Open pin-feed cover
4. Guide the paper into the paper slot, and push it through until it
comes up between the ribbon guide and the platen. (Moving the
paper with a side-to-side motion makes it easier to push the paper
through.)
5. Pull the paper up until the top is above the pin-feed holders. Fit the
holes on the left side of the paper over the pins in the left holder (as
shown in Figure 1-9)
and close the cover.
Figure 1-9.
Fitting the paper over the
pin feeds
Setting Up Your FX Printer
1-9