Epson FX-286e User Manual - Page 9
Selecting the Right Location, WARNING
View all Epson FX-286e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Tilt the tractor cover up and remove the two foam pads underneath it. (These pads protect the tractor unit during shipping; be sure to save them.) WARNING The printer is protected by a print head protector, a platen protector and two locking tabs during shipping. These protective items must be removed before you turn on the printer. Follow the steps below Figure 1-2. Also, you should install the paper feed knob. To install the knob, simply push it onto the shaft on the right side of the printer as shown in Figure 1-2. 1. Remove the left locking tab. 2. Remove the print head protector. 3. Move the print head to the left. 4. Remove the right locking tab and the platen protector. 2 Selecting the Right Location The most important consideration in choosing a location for your printer is that it be close enough to connect a cable to your computer. But also keep the following tips in mind: 1-2 Setting Up Your FX Printer