Epson FX-850 User Manual - Page 196
Initialization, Software initialization
View all Epson FX-850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Interface timing The figure below shows the timing for the parallel interface. Initialization There are three ways that the printer can be initialized (returned to a fixed set of conditions). Hardware initialization l When the power is turned on. l When the printer receives an INIT signal at the parallel interface (pin 31 goes LOW). Software initialization l Software sends the ESC @ (initialize the printer) command. A-8 Technical Specifications
Interface timing
The figure below shows the timing for the parallel interface.
Initialization
There are three ways that the printer can be initialized (returned to a
fixed set of conditions).
Hardware initialization
l
When the power is turned on.
l
When the printer receives an INIT signal at
the parallel interface (pin 31 goes LOW).
Software initialization
l
Software sends the ESC @ (initialize the
printer) command.
A-8
Technical Specifications