Epson FX-86e User Manual - Page 15
WARNING, holder in place. Leave the right holder unlocked.
View all Epson FX-86e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Now you are ready to load the continuous-feed paper. Just follow the steps below: 1. Using Figure 1-7 as a guide, pull the locking levers on the pin-feed holders forward so that you can move the holders to the left and right. Figure 1-7. Pin-feed locking levers 2. Move the left holder so that the locking lever is about 1/4 inch from the left side and push the locking lever back to lock that holder in place. Leave the right holder unlocked. 3. Open the pin-feed covers as shown in Figure 1-8. WARNING Do not use the pin-feed covers to move the pin-feed holders. 1-8 Setting Up Your FX Printer
Now you are ready to load the continuous-feed paper. Just follow the
steps below:
1. Using Figure 1-7 as a guide, pull the locking levers on the
pin-feed holders forward so that you can move the holders to
the left and right.
Figure 1-7.
Pin-feed
locking levers
2. Move the left holder so that the locking lever is about 1/4 inch
from the left side and push the locking lever back to lock that
holder in place. Leave the right holder unlocked.
3. Open the pin-feed covers as shown in Figure 1-8.
WARNING
Do not use the pin-feed covers to move the pin-feed holders.
1-8
Setting Up Your FX Printer