Epson FX-980 User Manual - Page 84

Switching Between Printing on Continuous Paper and Printing on Single Sheets You can easily switch back and forth between printing on 2 continuous paper with a push tractor and printing on single sheets without having to remove or reload the continuous paper. Switching to printing on single sheets To switch from printing on continuous paper with the rear or front push tractor to printing on single sheets, follow these steps: Note: t If continuous paper with labels is loaded in the printer, remove it before switching to single-sheet printing. See "Removing continuous paper with labels" on page 2-36. t If a tractor is in the pull position, remove any continuous paper from it before switching to single-sheet printing. See "Removing the paper from the pull tractor" on page 2-28. 1. If any printed pages remain in the printer, press the Tear Off/ Bin button to advance the paper to the tear-off position. Then tear off the printed pages. c Caution: t Tear off your printed document before you press the Load/Eject button in the next step. Reverse feeding several pages at a time may cause a paper jam. t Never use the knob to eject paper while the printer is on; this may damage the printer or cause it to lose the tearoff position. Printing on Continuous Paper 2-37