Epson GT-2500 Plus Product Information Guide - Page 4

Placing Originals on the Document Table 3., Epson GT-2500 and GT-2500 Plus

Page 4 highlights

Epson GT-2500 and GT-2500 Plus Placing Originals on the Document Table 1. Open the ADF. 3. If you are scanning multiple documents or photos at once, position each one at least 0.8 inches (20 mm) away from the others. 2. Place your document or photo on the document table, face down on the glass. Make sure the top of the document or photo is against the upper left corner of the document table. 4. Close the ADF gently so that your original does not move. Note: Always keep the document table and the underside of the ADF clean. See page 9 for instructions. Do not leave photos on the document table for an extended period of time as they may stick to the glass. 4 - Epson GT-2500 and GT-2500 Plus 7/06

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

Epson GT-2500 and GT-2500 Plus
4 - Epson GT-2500 and GT-2500 Plus
7/06
Placing Originals on the Document
Table
1.
Open the ADF.
2.
Place your document or photo on the document table, face
down on the glass. Make sure the top of the document or
photo is against the upper left corner of the document table.
3.
If you are scanning multiple documents or photos at once,
position each one at least 0.8 inches (20 mm) away from the
others.
4.
Close the ADF gently so that your original does not move.
Note:
Always keep the document table and the underside of the ADF clean.
See page 9 for instructions.
Do not leave photos on the document table for an extended period of
time as they may stick to the glass.