Epson Home Cinema 3800 Users Guide - Page 55
Pairing the 3D Glasses with the Projector
View all Epson Home Cinema 3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
6. Put on the 3D glasses and view the projected image. If you do not see a 3D image, pair the glasses with the projector. Note: If you change the video source or you are not within range of your projector, the glasses enter standby mode and the status light flashes green. Slide the power switch on the glasses to the Off position and then back to the On position to resume 3D viewing. Note: Make sure you are within 32 ft (10 m) of the projector when using the 3D glasses or you may lose your connection. Pairing the 3D Glasses with the Projector Charging the 3D Glasses 3D Viewing Range Parent topic: Using Basic Projector Features Related references Input Signal Settings - Signal Menu Optional Equipment and Replacement Parts Pairing the 3D Glasses with the Projector Pair the glasses with the projector to establish communication between them for 3D viewing. 1. Turn on the projector. 2. Set the image source on the projector to HDMI. 3. Project a 3D image. 4. Slide the power switch on the 3D glasses to the On position. 55