Epson Home Cinema 3800 Users Guide - Page 70
Changing the Image Aspect Ratio, Available Image Aspect Ratios, Parent topic, Aspect, Enter - 4k projector
View all Epson Home Cinema 3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Changing the Image Aspect Ratio Available Image Aspect Ratios Parent topic: Using Basic Projector Features Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it. Note: For HDMI sources, the input signal determines the image's aspect ratio. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Aspect button on the remote control. A list of the available aspect ratios appears. 3. To cycle through the available aspect ratios for your input signal, press the up or down arrow button. 4. Press Enter to select the aspect ratio. Parent topic: Image Aspect Ratio Related references Available Image Aspect Ratios Input Signal Settings - Signal Menu Available Image Aspect Ratios You can select the following image aspect ratios, depending on the input signal from your image source. Note: When the projector is in 3D mode, the aspect ratio is automatically set to Normal. If you project 3D images in Anamorphic Wide mode (Home Cinema 3800), only 1080p/24 Hz/frame packing signals are supported. When 4K Enhancement is turned on, you can only select Normal mode, or Anamorphic Wide or Horiz. Squeeze modes (Home Cinema 3800). 70