Epson Home Cinema 3800 Users Guide - Page 98
High Altitude Mode, Sleep Mode Timer
View all Epson Home Cinema 3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Setting Sleep Mode Sleep Mode Timer Illumination Trigger Out (Home Cinema 3800) High Altitude Mode Log Save Destination Description Automatically places the projector in standby mode after an interval of inactivity Sets the time before the projector automatically turns off (Sleep Mode must be turned on) from 1 to 30 minutes (30 minutes is the defualt) Turns off the status light on the projector Outputs a 12V DC signal (at a maximum of 200 mA) from the 3.5 mm mini-jack Trigger Out port whenever the projector is turned on Regulates the projector's operating temperature at altitudes above 4921 feet (1500 m) Sets where you want to save logs Note: If you select Anamorphic Wide as the Trigger Out setting, voltage is only output from the Trigger out port when the Aspect setting is set to Anamorphic Wide or Horiz. Squeeze (Home Cinema 3800). Note: The Reset setting does not reset the Memory, Projection, High Altitude Mode, Standby Mode or Language settings. Parent topic: Adjusting the Menu Settings Related references Projector Setup and Installation Options Related tasks Using the Home Screen Selecting the Language for the Projector Menus Adjusting the Color Convergence (Panel Alignment) 98