Epson LQ 1050 Technical Manual - Page 10
Features - printer driver
View all Epson LQ 1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
REV.-A 1.1 FEATURES The FX-850 and FX-1 050 are serial dot matrix 9-pin terminal printers that print at a maximum of 264 CPS. Either model FX-850 with 80 columns or FX-1 050 with 136 columns can be selected according to your requirements. The main features are as follows: q Max. printing speed: 264 CPS (Draft and Elite) 220 CPS (Draft and Pica) q Advanced paper handling functions: Auto tear-off Auto loading Auto back-out Micro adjustment q SelecType function (Any print mode can be selected directly from the front panel). Once a mode is selected, it is stored in the non-volatile memory, and is selected when the printer power is turned on. q Two NLQ fonts (Roman and Saris-serif) are standard. q Printer driver EPSON ESC/P-83 is standard. (This driver is compatible with the high class models such as FX-800, -1000, -86e, and -286e.) q Double-height function q Pitch control is possible in the NLQ mode. (Pica, elite, proportional modes) q Since the IBM emulation mode is standard, these printers are IBM-compatible. The IBM characters are also standard. q 8K-byte input data buffer (Buffering can be disabled.) q Push tractor unit q Printing is possible on envelopes and labels in addition to fan-fold paper, cut sheets, and roll paper. q User-defined characters are supported in both the Draft and NLQ (Saris-serif) modes. Once a character is registered, it is stored in the non-volatile memory and need not be re-registered. The user-defined character set can only be selected (as a default character set) using the DIP switches. q Compatible with EPSON optional interface board series #81 XX. FX-850 Figure 1-1. Exterior Views of the FX-850/1050 1-1