Epson LQ 1050 Technical Manual - Page 26
FX-850/l, SW1-4, SW1-3, ESC/P
View all Epson LQ 1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
REV.-A 1.4 DIP SWITCHES AND JUMPER SETTINGS This section describes the DIP switch selections and jumper setting for the FX-850/l 050 printer. 1.4.1 DIP Switch Settings The DIP switches are located at the right side of the printer. When the printer hardware is initialized, the following functions are set to the default values shown in the table below. Table 1-19. DIP Switch 1 Settings WV Description 1-1 Default character set 1-2 Shape of zero 1-3 Table select ON User-defined Slashed Graphic OFF ROM Not slashed Italic 1-4 Protocol mode IBM emulation ES C/P 1-5 Short tear-off mode off On 1-6 1-7 International character set See Table 1-20. 1-8 NOTE: When DIP SW1-4 is on (IBM mode), the function of DIP SW1-3 changes to auto CR ON/OFF. Default character set When DIP switch 1-1 is ON, the user-defined character set will be selected as default. User-defined characters are maintained in printer memory even when the power is turned off, so the user-defined character set can be easily selected simply by turning off the power, setting this switch to ON, and then turning the power on again. Shape of zero When DIP switch 1-2 is ON, prints a stashed zero (0); when OFF, prints open zeros (0). Useful for clearly distinguishing between uppercase O and zero when printing program lists, etc. Protocol mode When DIP switch 1-4 is ON, printer operates in the IBM emulation mode; when off, printer operates in the Epson ESC/P mode. Functions of DIP switches 1-6, 1-7, and 1-8 are different when using the printer in the IBM emulation mode. Short Tear-off When print operation has finished, the short tear-off feature automatically feeds the perforation of the continuous paper to the tear-off edge of the sheet guide cover so that the user can tear off the last sheet. When the user resume printing, the paper is fed backward to the loading position. 1-17