Epson Livingstation LS57P2 User Manual - Page 114

Light Equipment switch Power TV STB1 STB2 VCR DVD REC PAUSE SKIP STOP REW PLAY FF Photo View Freeze Print Menu Exit Photo Zoom Prev. Select Enter Next Rotate Select 1 2 3 4 5 6 7 8 9 TV/ Video 0 Mute Ch Enter Favorite Vol. Ch Aspect POP Swap Sleep MTS Guide Ch Prev. Ch Display Info TV Reception or Operation Problems Problem TV reception is poor. The TV channels can't be changed or selected. You can't receive a digital broadcast. Solution Check your antenna, cable, or digital or satellite receiver connections. See page 16 for details. Weather conditions and interference from other nearby equipment may be affecting the picture quality. Turn off or relocate equipment such as hair dryers or microwave ovens, if possible. When the TV is warming up or cooling down (the Power light is flashing), you can't use the buttons. When the Power light stays lit green or orange, the buttons are operable. You may have locked access to certain channels. Press the Menu button on the TV panel or remote control. Check the Channel Lock settings on the Lock menu as described on page 59. You may have marked the channel to be skipped. Press the Menu button on the TV panel or remote control. Check the Manual Program settings on the Channel menu as described on page 49. If your cable system added channels and you can't receive them, you need to run the Auto Program utility to add them to your TV's list of receivable channels. Press the Menu button on the TV panel or remote control. Select the Auto Program setting on the Channel menu as described on page 47. You must connect the TV to a digital TV receiver to receive digital broadcasts. Remote Control Problems Problem Solution The remote control doesn't work. If you have problems with the remote control, press any button on the remote to check if the light on the top comes on. If the light comes on, move closer to the TV when you use the remote control and aim it at a more direct angle. Make sure the room lighting is not too bright and not shining directly on the remote control or the TV receiver window. Also clean the transmitter area on the top of the remote and the receiver window on the TV to see if that helps. If the light doesn't come on, make sure the batteries are inserted correctly and are working. If necessary, replace the batteries. Make sure the equipment switch at the top of the remote control is set to the device you're trying to control. If you still have problems with the remote control, try the other suggestions on page 34. 114 Solving Problems