Epson Livingstation LS57P2 User Manual - Page 19
Cable Box Unscrambles Only Some of Your Channels, ANT 1, RF Output
![]() |
View all Epson Livingstation LS57P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Cable Box Unscrambles Only Some of Your Channels If your cable box unscrambles signals for only some of your channels, connect it as follows: 1 Connect the cable coming into the house to the ANT 1 connector on the back of the TV. 2 Remove the jumper cable connected to both the RF Output and ANT 2 connectors on the back of the TV. Retain the cable. 3 Connect one end of a coaxial cable to the RF Output connector on the back of the TV. 4 Connect the other end of the coaxial cable to the IN connector on the cable box. If your coaxial cable has a screw-type connector on the end, secure it by turning the end clockwise. 5 Connect another coaxial cable to the OUT connector on the cable box. 6 Connect the other end of the coaxial cable to the ANT 2 connector on the back of the TV. 7 Be sure to turn on use of the TV's ANT 2 port, as described on page 47. Note Be sure to retain the jumper cable in case you change your TV connections later. You'll need to connect it again in certain connection schemes to provide the channel zapping feature. Wall jack Coaxial cables Cable box Setting Up the TV 19
![](/manual_guide/products/epson-livingstation-ls47p2-user-manual-0b95805/19.png)