Epson Livingstation LS57P2 User Manual - Page 36

Note If there are multiple codes listed for your equipment manufacturer and the first one you choose doesn't work, try another code. After you replace the remote control's batteries, you will still be able to use it to operate the TV and tuner. But you will have to re-enter the codes for any other equipment that you want to control. Light Equipment switch Controlling Other Equipment With the Remote Control You can program the remote control to operate other home theater equipment, such as a DVD player, VCR, or satellite receiver. That way, you can use just one remote control when watching movies or TV programs. First you must program your remote control so it knows what kind of equipment you're using. You do this by entering a code that corresponds to the equipment and its manufacturer. Programming the Remote Control 1 Look up the three-digit code for your equipment and manufacturer in the tables beginning on page 37. 2 Slide the equipment switch on the top of the remote control to the setting for your equipment type. For example, to enter a DVD player code, slide the switch to the DVD setting. If you reprogram the STB1 setting, you won't be able to use the remote control to operate the HDTV tuner that may have come with your TV, unless you re-enter the tuner's code (101). Power TV STB1 STB2 VCR DVD REC PAUSE SKIP STOP REW PLAY FF Photo View Freeze Print Menu Exit Photo Zoom Prev. Select Enter Next Rotate Select 1 2 3 4 5 6 7 8 9 TV/ Video 0 Mute Ch Enter Favorite Vol. Ch Aspect POP Swap Sleep MTS Guide Ch Prev. Ch Display Info Control buttons Menu button 3 Hold down the Menu button on the remote control until its light comes on (about 2 to 3 seconds). 4 Enter the three-digit code using the remote control number buttons (for example, 420). The remote control beeps once. If it beeps 3 times, you've entered an invalid code. Repeat steps 3 and 4 using the correct code. Number buttons Using the Programmed Remote Control With Your Other Equipment Once you've programmed the remote control, follow these steps to use it to control your equipment: 1 Slide the equipment switch at the top of the remote control to the type of equipment you want to control, such as DVD. 2 Use the 8 buttons on the top of the remote control to play and stop movies, skip and pause tracks, etc. When you want to operate the TV again, slide the equipment switch on the remote control back to the TV position. 36 Setting Up the TV