Epson Livingstation LS57P2 User Manual - Page 90

Power TV STB1 STB2 VCR DVD REC PAUSE SKIP STOP REW PLAY FF Photo View Freeze Print Menu Exit Photo Zoom Prev. Select Enter Next Rotate Select 1 2 3 4 5 6 7 8 9 TV/ Video 0 Mute Ch Enter Favorite Vol. Ch Print 2 Press the Print button on the TV panel or remote control. You see the Print Settings screen: Aspect POP Swap Sleep MTS Guide Ch Prev. Ch Display Info Caution Remove your printed photos before 10 of them have ejected from the printer so they don't block additional photos from ejecting properly or cause a paper jam. Don't open the lock cover on the front of the printer while it is printing; this causes printing to stop. Don't remove your photo card while the printer is printing any photos from the card. Wait for all the queued print jobs to finish. 3 To print one copy of the photo, press Enter. To print multiple copies, press Prev. < or Next > until the number in the Copies box is correct. Then press Enter. After a moment, printing starts. During printing, the Printer light flashes. When printing is finished, the Printer light turns off. 4 To print additional photos, repeat these steps. You can send multiple photos for printing at one time, up to 15 photos. To monitor your print job or to cancel it, see the next section. If you see a printing error message, select Yes to check for the problem. Then follow the on-screen instructions to solve the problem and continue printing. For additional help, see page 115. When you're finished printing, remove the borders from the edges of your photo by bending them back and forth and tearing them off. 90 Viewing, Printing, and Saving Photos